Ricoh G108 Service Manual page 120

SERVICE PROGRAM MODE
5857 Save Debug Log
5857 001* On/Off
Enables or disables the debug log saving function.
5857 002* Target
Selects the storage for the debug log.
5857 005* Save to HDD
Specifies the key number of the debug log.
5857 006* Save to SD
Specifies the key number of the debug log.
5857 009* HDD to SD (4 MB)
Copies the latest 4 MB of debug log from the hard disk to the SD card.
5857 010* HDD to SD (Any)
Specifies the key number of the debug log copied from the hard disk to the SD
card.
5857 011* Erase HDD Log
Deletes the debug log from the hard disk.
5857 012* Erase SD Log
Deletes the debug log from the SD card.
5857 013* Free Space on SD
Displays the free space on the SD card.
5857 014* SD to SD (4 MB)
Copies the latest 4 MB of debug log from an SD card to another SD card.
5857 015* SD to SD (Any)
Specifies the key number of the debug log copied from an SD card to another
SD card.
5857 016* Make HDD Log File
5857 017* Make SD Log File
G108
[0 to 1 / 0 / 1/step]
0: Disabled, 1: Enabled
[2 to 3 / 2 / 1/step]
2: Hard disk, 3: SD card
Generates a log file on the HDD to save debug
logs. To save debug logs, the controller
generates a log file first, and writes data in the
file afterward. This processing may take a long
time. The user may turn off the main power
switch before the log is written in the file. To
prevent this possible problem, you can prepare
a log file beforehand. The controller takes a
shorter time to save logs since the log file is
already generated.
5-18 SM