Ricoh G108 Service Manual page 115

5507* Supply Alarm DFU
Enables or disables the supply alarm.
5507 001* Paper Supply Alarm
5507 003* Toner Supply Alarm
Sets the supply alarm level. Each supply alarm counter increases by +1 when a sheet of the
size is used. The supply alarm is issued when one of the supply alarm counter reaches the
specified value.
5507 128* Interval: Others
5507 133* Interval: A4
5507 134* Interval: A5
5507 142* Interval: B5
5507 164* Interval: LG
5507 166* Interval: LT
5507 172* Interval: HLT
5801 Memory Clear
5801 001 All
5801 003 SCS
5801 004 IMH
5801 005 MCS
5801 008 PRT
5801 011 NCS
5801 014 DCS Setting
5801 015 Clear UCS Setting
5801 016 MIRS Setting
5808* Destination
Shows the destination code.
5811 Serial Number
5811 002 Display Controller Serial
Number
5811 010 Display Engine Serial
Number
5811 011 Set Engine Serial Number
SM
[0 to 1 / 0 / 1/step]
0: OFF, 0: ON
[250 to 10000 / 1000 / 1/step]
5.1.4
Executes Engine SP5-801-003 through 014.
Clears the system settings.
Clears IMH data. DFU
Clears MCS data. DFU
Clears the printer application settings.
Initializes the system default and interface
settings (IP address also), SmartNetMonitor for
Admin, WebStatusMonitor settings, and the
TELNET settings.
Clears or deletes the DCS-related data and
information.
Clears or deletes the UCS-related data and
information.
Clears or deletes the MIRS-related data and
information.
Shows the serial number.
Ask your supervisor for the information on this
SP.
5-13
SERVICE PROGRAM MODE
G108