5.1.5 TELEPHONE NUMBER SETTING (SP5-812)
Do this to set telephone numbers:
1. Enter SP mode.
2. Select Engine SP5-812-1 (Service) or
2 (FAX TEL No.) by pressing the
Enter key.
3. Press the Enter key. A cursor is
shown on the bottom-left corner.
4. To select a column, press the enter
key [D]. A character is shown in the
column.
5. To change the character, press the
up-arrow key or the down-arrow key.
The characters change as follows:
1) Numbers ("0" to "9")
2) Uppercase letters ("A" to "Z")
3) Hyphen
4) Period
6. To select the character, with the character displayed, press the Enter key.
7. To move the cursor, push the up-arrow key [B] or the down-arrow key [C].
8. Set all necessary characters.
9. To quit the program, press the Escape key [A].
SM
SERVICE PROGRAM MODE
Online
Menu
Job Reset Escape
[A]
Form Feed
#Enter
Power
Alert
5-37
[B]
[C]
[D]
Data In
G108S901.WMF
G108