Tables - Ricoh G108 Service Manual

5.1.2 SERVICE
Abbreviations and keys:
* : Saved in the NVRAM on the controller
FA : Factory setting (These settings may have been adjusted before
shipment from the factory.)
DFU : Design/Factory Use (Do not alter these settings.)
Possible Settings:
[Adjustable range / Default / Step] : Step is the amount of minimum change.
[Setting 1, Setting 2, Setting 3, ... ] : Boldface shows the default.
Service SP or Engine SP:
Service SPx-xxx-xxx : Service SP (
Engine SPx-xxx-xxx : Engine SP (

Tables

1001 Bit Switch
Adjusts bit switch settings. DFU
1001 001* Bit Switch 1
1001 002* Bit Switch 2
1001 003* Bit Switch 3
1001 004* Bit Switch 4
1003 Clear Setting
1003 001 Initialize System
1003 003 Delete Program
1004 Print Summary
Prints the service summary sheet (a summary of all the controller settings).
1005 Display Version
Shows the version of the controller firmware.
1101 Toner Control Set
1101 001* Toner (Factory)
1101 002* Toner (Previous)
1101 003* Toner (Current)
1102* Toner Control Set
Sets the resolution and the print mode of the printer gamma adjustment. The
asterisk (*) shows which mode is selected.
• *1200 x 600 Photo • 600 x 600 Text
• 1200 x 600 Text
SM
5.1.2)
5.1.3)
1001 005* Bit Switch 5
1001 006* Bit Switch 6
1001 007* Bit Switch 7
1001 008* Bit Switch 8
Initializes settings in the system menu of the user
mode.
DFU
Recalls one of these gamma settings:
• Factory setting
• Previous setting
• Current setting
• 600 x 600 Photo
5-3
SERVICE PROGRAM MODE
G108