FUSING UNIT AND FUSING LAMP
3.9 FUSING UNIT AND FUSING LAMP
CAUTION
1. Before attempting any maintenance, turn off the main power switch and
unplug the machine.
2. Use extreme caution when you touch the fusing unit. The fusing unit can
be very hot.
3. Do not remove or adjust the tension bolts [Y] or the hot-roller guard [Z].
Proper operation is not guaranteed if you remove or adjust them.
1. Open the rear cover [A].
2. Release the locks [B][C].
3. Fusing unit [D]
Necessary Setting
After replacing the fusing unit, execute
SP7-905-002 (PM Parts Clear, Fusing).
4. Top cover [E] (
5. Front cover [F] (
6. Ground cable [G] (
7. Screw at the right end of the
fusing lamp [H]
8. Screw at the terminal of the
fusing lamp [I]
9. Bottom cover [J] (
NOTE: One screw is at the
right end [K]. The
other three are on the
bottom.
G108
[A]
x 2)
[E]
x 2)
x 1)
[G]
x 4)
[Z]
[J]
[F]
[D]
[B]
[Y]
3-18
[C]
G108R941.WMF
[H]
[I]
[K]
G108R942.WMF
SM