Ricoh G108 Service Manual page 117

5824 NVRAM Upload
Uploads the UP and SP mode data (except for counters and the serial
number) from the NVRAM to an SD card.
5825 NVRAM Download
Downloads the UP and SP mode data from an SD card to the NVRAM.
5828 Network
5828 066* HD job clear
Treatment of the job when a spooled job exists at power on.
5828 069* Job Spool (Protocol)
Switches job spooling off or on and allows settings for job spooling protocols.
5828 074* Delete Password
5828 084* Print Settings List
5828 090* TELNET
Enables or disables Telnet.
5828 091* Web
Enables or disables the Web monitor.
5828 115* SMB Computer Name
Displays the SMB computer name.
5828 116* SMB Workgroup Name
Displays the workgroup name.
5832 HDD Initialization
Initializes the hard disk. Use this SP mode only when a hard disk error occurs.
This SP initializes the whole area (the all partitions) in the hard disk.
SM
SERVICE PROGRAM MODE
[0 to 1 / 1 / 1/step]
0: Data is cleared
1: Automatically printed
[0 to 1 / 1 / 1/step]
0: Off, 1: On
Bit switch:
• Bit 0: LPR
• Bit 1: FPT
• Bit 2: IPP
• Bit 3: SMB
• Bits 4 to 7: Reserved
Deletes passwords.
Prints a list of NCS related parameters.
[0 to 1 / 1 / 1/step]
0: Disabled, 1: Enabled
[0 to 1 / 1 / 1/step]
0: Disabled, 1: Enabled
5-15 G108