Ricoh G108 Service Manual page 116

SERVICE PROGRAM MODE
5812 Tel. No. Setting (
5812 001* Service
Sets the telephone number for a service representative. This number is printed
on the counter list, which can be printed with the user's "Counter" menu. This
can be up to 20 characters (both numbers and alphabetic characters can be
input).
5812 002* FAX TEL No.
Sets the fax or telephone number for a service representative. This number is
printed on the Counter List, which can be printed with the user's "Counter"
menu if the Meter Charge mode is selected with Engine SP5-930-1. This can
be up to 13 characters (both numbers and alphabetic characters can be input).
5816 Remote Service
5816 001* I/F Setting
5816 002* CE Call
5816 003* Function Flag
5816 006* Device Information
Displays or does not display the device information in the User Tools.
5816 007* SSL Disable
5816 008* RCG Connect Time
Sets the timeout counter for the remote connection.
5816 009* RCG Write Timeout
Sets the timeout counter for the writing processing.
5816 010* RCG Read Timeout
Sets the timeout counter for the reading processing.
5816 011* Port 80 Enable
Enables or disables the access to the SOAP method via port 80.
5821 Remote Service Address
5821 001* CSS-PI Device Code
5821 002* RCG IP Address
Specifies the IP address of the RCG (Remote Communication Gate).
G108
5.1.5)
Japan Only
[0 ∼ 1 / 1 / 1/step]
0: Off
1: Network (The remote service function is on.)
[0 ∼ 1 / 1 / 1/step]
0: Start, 1: End
[0 ∼ 1 / 1 / 1/step]
0: Off (The remote service function is disabled.)
1: On (The remote service function is validated.)
[0 ∼ 1 / 0 / 1/step]
0: Not displayed, 1: Displayed
[0 ∼ 1 / 0 / 1/step]
0: Enabled, 1: Disabled
[1 ∼ 90 / 10 / 1 second/step]
[0 ∼ 100 / 60 / 1 second/step]
[0 ∼ 100 / 60 / 1 second/step]
[0 ∼ 1 / 0 / 1/step]
0: Disables, 1: Enables
[0 ∼ 4 / 0 / 1/step] DFU
[00000000h ∼ FFFFFFFFh / 00000000h /
1/step]
5-14 SM