Ricoh G108 Service Manual page 136

SERVICE PROGRAM MODE
8521* T: PrtPGS/FIN
8524* P: PrtPGS/FIN
001 Sort
002 Stack
003 Staple
004 Booklet
• Even if the pages are too many for the finisher to staple, all pages are counted
(including unstapled pages). - Not applicable to this product.
• The counter of stapling (003) increases by +1 when the paper is transported from
the printer to the tray of the finisher. Even if a paper jam occurs on this path, the
counter (003) increases. If the same job is retried, the counter (003) increases
once again (not applicable to this product).
Staples
8531*
8581* T: Counter
001 Total
002 Total: Full Color
003 B&W/Single Color
004 Development: CMY
005 Development: K
006 Copy: Color
8584 P: Counter
001 B/W
002 Single Color
8591* O: Counter
001 A3/DLT
002 Duplex
• Note that these counters are not for the printer's application program.
8771* Dev Counter
001 Total
002 K
003 Y
G108
The number of pages processed by the finisher
[0~9999999/ 0 / 1/step]
[0~9999999/ 0 / 1/step]
005
006
007
The number of staples
[0~9999999/ 0 / 1/step]
The number of outputs in a specific color mode
[0~9999999/ 0 / 1/step]
007
008
009
010
011
The number of outputs in a specific color mode
[0~9999999/ 0 / 1/step]
003
The number of A3/DLT, duplex printing, or staples
[0~9999999/ 0 / 1/step]
003
The number of rotations of the development rollers
[0~9999999/ 0 / 1/step]
004
005
5-34
Z-Fold
Punch
Other
Copy: B/W
Print: Color
Print: B/W
Total: Color
Total: B/W
Full Color
Staple
M
C
SM