Adding An Analyzer Server - Dell SMA 200 Administration Manual

Dell SonicWALL Analyzer is a software application that creates dynamic, web-based network reports. The
Analyzer Reporting Module generates both real-time and historical reports to offer a complete view of all
activity through Dell SonicWALL network security appliances. With Analyzer Reporting, you can monitor network
access, enhance security, and anticipate future bandwidth needs. The Analyzer Reporting Module:
• Displays bandwidth use by IP address and service
• Identifies inappropriate Web use
• Provides detailed reports of attacks
• Collects and aggregates system and network errors
• Shows VPN events and problems
• Presents visitor traffic to your Web site
• Provides detailed daily logs to analyze specific events.
For more information about monitoring your Dell SonicWALL appliances with Analyzer, visit 
TIP:
http://www.sonicwall.com/us/support/6631.html

Adding an Analyzer Server

This feature requires an Analyzer license key.
To add the SMA/SRA appliance to an Analyzer server and enable Analyzer reporting on your
SMA/SRA appliance:
1 Navigate to the Log > Analyzer page in the Secure Mobile Access web-based management interface.
NOTE: If you are using Analyzer for the first time on this appliance or if you do not have a
valid license, the page provides a link to the System > Licenses page to activate your
license.
2 In the Analyzer Settings section, click the Add. The Add Analyzer Server screen displays.
3 In the Add Analyzer Server screen, enter the Hostname or IP Address of your Analyzer server.
4 Enter the Port which your Analyzer server communicates with managed devices. The default is 514.
5 Click Accept at the top of the page to add this server.
6 To start Analyzer report logging for the server you just added, select Enable Analyzer.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
427