Dell SMA 200 Administration Manual page 224

Secure Shell Version 2 (SSHv2)
• Select an Access Type Selection. Smart or Manual.
• Smart: Allows the firmware to decide which mode to launch on the client.
When creating a new unified bookmark, Smart is selected by default. Auto-detection is processed
using bookmark-specific default modes while launching the bookmark.
• Manual: Provides options to configure the modes, their priorities, and the choose method. At
least one mode should be enabled in the selection box.
The launch sequence is as follows: HTML5 and Java. Selecting Manual allows you to change,
enable, or disable the launch methods.
The up and down arrows are used to adjust the launch priority. Fork and tick are used to disable
or enable the modes. Disabled modes are put at the bottom of the list with a gray font color.
The Choose during Launch option is not enabled by default under the Manual mode. In this
setting, while launching the bookmark, the first available mode in the configured list is run at
once after auto-detection.
After the Choose during Launch option is enabled, while launching the unified bookmark, if
there are multiple modes available for the client, a menu is provided from which you can choose
within a five second count-down. When only one mode is available, the bookmark is also run
immediately.
SSHv2 Java Settings
• Select Authentication with public/private keys to support RSA or DSA keys.
• If using an SSHv2 server without authentication, such as a Dell SonicWALL appliance, you can
select Bypass username.
SSHv2 HTML5 Settings
• Select the Default Font Size. Supported options range from 12 to 99 points.
• Optionally select Automatically log in and select Use SSL VPN account credentials to forward
credentials from the current Secure Mobile Access session for log in to the secure Web server.
Select Use custom credentials to enter a custom username, password, and domain for this
bookmark. For more information about custom credentials, see
SSO Credentials
SSHv2 Common Settings
• Optionally select Automatically accept host key. This option allows the browser to keep the
server's public host key in local storage automatically.
• To display the bookmark (Desktop, Web, and Terminal services only) on mobile devices using
Mobile Connect 2.0 or higher, check Display Bookmark to Mobile Connect clients to display the
bookmark on mobile devices.
• If using an SSHv2 server without authentication, such as a Dell SonicWALL firewall, you can select
Bypass username.
on page 379.
Creating Bookmarks with Custom
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
224