Managing Language Settings - Dell SMA 200 Administration Manual

Uploading New Firmware
To upload new firmware:
1 Log in to MySonicWALL.
2 Download the latest Secure Mobile Access firmware version.
3 In the Secure Mobile Access management interface, navigate to the System > Settings page.
4 Click Upload New Firmware under the Firmware Management section.
5 Click Browse.
6 Select the downloaded Secure Mobile Access firmware. It should have a .sig file extension.
7 Click Open.
8 Click Accept. Wait for the firmware to upload and be written to the disk.
9 The System > Settings page displays the firmware table, with the uploaded firmware listed in it. Click
the Boot icon in the Uploaded Firmware row to boot the new firmware with existing settings.

Managing Language Settings

SMA/SRA appliances allow you to import and apply new language packs to the firmware. The language packs are
stored on the back end server. The Secure Mobile Access firmware is scheduled to check the back end server
every hour for updates to existing or new language packs.
These tasks are described in the following sections:
• Downloading a language pack
• Importing a language pack
• Selecting a language
• Querying for new languages
Downloading a language pack
The Language Settings section displays the newest language pack(s) available. Log in to MySonicWALL to
download the language pack to your local system, or click the link for the language you want to download to be
automatically directed to MySonicWALL.
Importing a language pack
After you have downloaded a new language pack from MySonicWALL, you can import it to your Secure Mobile
Access firmware. Click Import. Then, click Choose File to select the language file to import. Click Open.
on page 103
on page 103
on page 104
on page 104
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
103