Dell SMA 200 Administration Manual page 87

Before You Register
Verify that the time, DNS, and default route settings on your SMA/SRA appliance are correct before you register
your appliance. These settings are generally configured during the initial SMA/SRA appliance setup process. To
verify or configure the time settings, navigate to the System > Time page. To verify or configure the DNS
setting, navigate to the Network > DNS page. To verify or configure the default route, navigate to the
Network > Routes page. For more information about time and DNS setting configuration, refer to
Time on page 96, Configuring DNS Settings on page 125 and Configuring a Default Route for the SMA/SRA
Appliance on page 127.
NOTE: You need a MySonicWALL account to register the Dell SonicWALL SMA/SRA appliance.
Creating a MySonicWALL Account from System > Licenses
1 On the System > Licenses page, click Activate, Upgrade, or Renew services. The License
Management page is displayed.
2 If you do not have a MySonicWALL account or if you forgot your user name or password, click the
https://www.mysonicwall.com link at the bottom of the page. The MySonicWALL User Login page is
displayed.
Do one of the following:
• If you forgot your user name, click the Forgot Username? link.
• If you forgot your password, click the Forgot Password? link.
• If you do not have a MySonicWALL account, click the Not a registered user? link.
3 Follow the instructions to activate your MySonicWALL account.
Registering with MySonicWALL
There are two ways to register your SMA/SRA appliance:
• Log in to your MySonicWALL account directly from a browser or click the Dell SonicWALL link on the
System > Status page to access MySonicWALL, enter the appliance serial number and other information
there, and then enter the resulting registration code into the field on the System > Status page. This
manual registration procedure is described in this section.
• Use the link on the System > Licenses page to access MySonicWALL, then enter the serial number and
other information into MySonicWALL. When finished, your view of the System > Licenses page shows
that the appliance has been automatically synchronized with the licenses activated on MySonicWALL.
This procedure is described in
To register your SMA/SRA appliance:
1 If you are not logged into the Secure Mobile Access management interface, log in with the username
admin and the administrative password you set during initial setup of your SMA/SRA appliance (the
default is password). For information about configuring the administrative password, refer to the
Getting Started Guide for your appliance model.
2 If the System > Status page is not automatically displayed in the Secure Mobile Access management
interface, click System in the left-navigation menu, and then click Status.
3 Record your Serial Number and Authentication Code from the Licenses & Registration section.
4 Do one of the following to access the MySonicWALL Web page:
• Click the Dell SonicWALL link in the Licenses & Registration section.
• Type http://www.mysonicwall.com
Registering the SMA/SRA Appliance with System > Licenses
into the Address or Location field of your Web browser.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
Setting the
on page 90.
87