Netgear Wireless Router MR814 SSL
configuration
This guide assumes that your NetGear Wireless Router is configured with an IP of 192.168.100.1 and your
SMA/SRA appliance is configured with an IP of 192.168.100.2.
1
Navigate to Advanced > Port Management in the left index of your Netgear management interface.
2
Click Add Custom Service in the middle of the page.
3
Enter a service name in the Service Name field (ex. SMA)
4
Enter 443 in the Starting Port field.
5
Enter 443 in the Ending Port field.
6
Enter the WAN IP address of the SMA/SRA appliance (ex.192.168.100.2) in the Local Server Address
field.
7
Click Accept.
Your Netgear wireless router is now ready for operations with the SMA/SRA appliance.
Check Point AIR 55
Topics:
•
Setting up an SMA/SRA Appliance with Check Point AIR 55
•
Static Route
on page
•
ARP
on page
450
450
on page
449
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
448