Dell SMA 200 Administration Manual page 281

• Disable – Disables Web Application Firewall inspection for the host.
• Detect – Lowers the action level from prevention to only detection and logging for the host.
• No Action – Web Application Firewall inspects host traffic, but takes no action.
4 In the Host field, type in the host entry as it appears in the bookmark or offloaded application. This can
be a host name or an IP address. Up to 32 characters are allowed. To determine the correct host entry
for this exclusion, see
You can configure a path to a particular folder or file along with the host. The protocol, port, and the
request parameters are simply ignored in the URL. If a path is configured, then the exclusion is
recursively applied to all subfolders and files. For instance, if Host is set to
webmail.company.com/exchange, then all files and folders under exchange are also excluded.
5 Click Add to move the host name into the list box.
6 Repeat Step 4 and
7 When finished, click Accept.
Configuring Intrusion Prevention Error Page Settings
To configure the error page to use when intrusions are detected:
1 Expand the Intrusion Prevention Error Page Settings section.
2 In the Intrusion Prevention Response drop-down list, select the type of error page to be displayed
when blocking an intrusion attempt.
Determining the Host Entry for Exclusions
Step 5 to add more hosts to this exclusion.
on page 290.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
281