2
If adding the domain, select RADIUS from the Authentication Type menu. The RADIUS configuration
field is displayed.
3
If adding the domain, enter a descriptive name for the authentication domain in the Domain Name
field. This is the domain name users selects in order to log in to the Secure Mobile Access portal.
4
Select the proper Authentication Protocol for your RADIUS server. Choose from PAP, CHAP, MSCHAP, or
MSCHAPV2.
5
Under Primary Radius Server, enter the IP address or domain name of the RADIUS server in the RADIUS
Server Address field.
6
Enter the RADIUS server port in the RADIUS server port field.
7
If required by your RADIUS configuration, enter an authentication secret in the Secret Password field.
8
Enter a number (in seconds) for RADIUS timeout in the RADIUS Timeout (Seconds) field.
9
Enter the maximum number of retries in the Max Retries field.
10 Under Backup Radius Server, enter the IP address or domain name of the backup RADIUS server in the
RADIUS Server Address field.
11 Enter the backup RADIUS server port in the RADIUS server port field.
12 If required by the backup RADIUS server, enter an authentication secret for the backup RADIUS server in
the Secret Password field.
13 Optionally, if using RADIUS for group-based access, select Use Filter-ID for RADIUS Groups.
14 Click the name of the layout in the Portal Name drop-down list.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
181