Editing Network Objects - Dell SMA 200 Administration Manual

3 Type a string in the Name field that is the name of the network object you are creating.
NOTE: To edit an existing network object, select Configure next to the object you want to edit. A
new network object with the same name as an existing network object does not replace or modify
an existing network object.
4 Click on the Service list and select a service type: Web (HTTP), Secure Web (HTTPS), NetExtender,
Terminal Services (RDP), Terminal Services (RDP, RDP - Java, RDP - ActiveX, RDP - HTML5), Virtual
Network Computing (Java, HTML5), File Transfer Protocol, Telnet, Telnet (HTML5), Secure Shell Version 1
(SSHv1), Secure Shell Version 2 (SSHv2 that provides stronger encryption than SSHv1 and can only
connect to a server that support SSHv2), File Shares (CIFS), or Citrix Portal.
5 Click Accept. The Edit Network Object screen is displayed, showing the network object name and the
service associated with it. To complete the object by adding addresses mapped to the network object,
see

Editing Network Objects

Editing Network Objects
To edit a network object, complete the following steps:
1 To edit an existing network object, navigate to the Network > Network Objects page and click the
Configure icon or click the Incomplete link for the object you wish to edit. The Edit Network Object
screen is displayed.
If you just created a network object, the Edit Network Object screen is displayed as soon as you
clicked Accept.
The Edit Network Object shows the network object name and the service associated with it. It also
contains an address list that displays existing addresses mapped to the network object.
2 To change the service, select the desired service from the Service drop-down list and then click Update
Service. The Service column in the Network Objects table displays the new service, and the Edit
Network Object dialog box remains open. You can click Done if finished.
3 To add or edit Type and Address values for this Network Object, click Add. The Define Object Address
page is displayed.
4 When finished adding addresses, click Done in the Edit Network Object screen.
5 The Network > Network Objects page is displayed with the new network object in the Network
Objects list.
6 If the object is not fully defined with at least one IP address or network range, the status Incomplete
displays. Click the Incomplete link or the Configure icon to edit the network object again, and then
on page 131.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
131