Table of Contents
Advertisement
3
In the Subnet Mask/Prefix field, enter the number of bits used for the prefix.
4
In the Default Gateway field, type the IP address of the gateway device that connects the appliance to
the network.You can enter an IPv6 address.
5
In the Interface drop-down list, select the interface that connects the appliance to the desired
destination network.
6
Click Accept.
Network > Host Resolution
This section provides an overview of the Network > Host Resolution page and a description of the
configuration tasks available on this page.
•
Network > Host Resolution Overview
•
Configuring Host Resolution
Network > Host Resolution Overview
The Network > Host Resolution page allows the administrator to configure host names.
Figure 23. Network > Host Resolution Page
on page
128
on page
129
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
128
Advertisement
Chapters
Table of Contents
Troubleshooting
