Dell SMA 200 Administration Manual page 445

1 Open browser and enter the IP address of the WatchGuard Firebox X Edge appliance (such as
192.168.100.1). When successful, you'll be brought to the "System Status" page (See the following).
2 If the WatchGuard's management interface is already configured to accept HTTPS on port 443 you need
to change the port in order to be able to manage both the SMA/SRA and WatchGuard appliances.
3 Navigate to Administration > System Security.
Figure 62. WatchGuard Administration > System Security Dialog Box
4 Clear Use non-secure HTTP instead of secure HTTPS for administrative Web site.
5 Change the HTTP Server Port to 444 and click Submit.
The WatchGuard is now managed from the WAN on port 444. It should be accessed as follows:
https://<watchguard wan ip>:444
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
445