Dell SMA 200 Administration Manual page 94

An option is available to automatically enable and disable the license depending on the number of user
connections. Select Automatically activate Spike License to enable it. If this option is enabled, the Spike
License is automatically activated when the number of connected users exceeds your normal user license. The
Spike License stays active until either the number of users decreases back to your normal licensed amount or
the Spike License expires.
To activate or stop a Spike License:
1 Purchase your Spike License from MySonicWALL and import it to the appliance, as described in
or Upgrading Licenses
supported and number of usage days remaining in the Spike License are shown on the System > Licenses
page.
2 After reloading the page, the Spike License is listed as Off on the System > Licenses page.
3 When you need to accommodate more users, click Activate. The status changes to Active.
4 To stop an active Spike License, click Stop. The status goes back to Off, and the number of days
remaining is updated.
NOTE: Whenever you activate and then stop a Spike License, the number of days for which
it is valid decreases by one, even if fewer than 24 hours have elapsed. If it remains active
for several days, a day is subtracted after each 24 hour period.
on page 92. After licensing, the status is updated to Licensed, and the total users
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
Activating
94