Dell SMA 200 Administration Manual page 389

3 In the Edit Local Group page, select the Nx Routes tab.
4 In the Tunnel All Mode drop-down list, select one of the following:
• Use global setting - Take the action specified by the global setting. See
page 413.
• Enabled - Force all traffic for this user, including traffic destined to the remote users' local
network, over the Secure Mobile Access NetExtender tunnel. Affects all members of the group.
Overrides the global setting.
• Disabled - Disable this action for all members of the group. Overrides the global setting.
5 To add globally defined NetExtender client routes for members of this group, select Add Global
NetExtender Client Routes.
6 To configure NetExtender client routes specifically for members of this group, click Add Client Route.
7 On the Add Client Route screen, enter a destination network in the Destination Network field. For
example, enter the IPv4 network address 10.202.0.0. For IPv6, enter the IPv6 network address in the
form 2007::1:2:3:0.
8 For an IPv4 destination network, type the subnet mask in the Subnet Mask/Prefix field using decimal
format (255.0.0.0, 255.255.0.0, or 255.255.255.0). For an IPv6 destination network, type the prefix,
such as 112.
9 On the Add Client Route screen, click Accept.
10 On the Edit Local Group page, click Accept.
Enabling Group NetExtender Client Routes
To enable global NetExtender client routes for groups that are already created:
1 Navigate to Users > Local Groups.
2 Click the configure icon next to the group you want to configure.
3 In the Edit Local Group page, select the Nx Routes tab.
4 Select Add Global NetExtender Client Routes.
5 Click Accept.
Enabling Tunnel All Mode for Local Groups
This feature is for external users, who inherit the settings from their assigned group upon login. Tunnel all mode
ensures that all network communications are tunneled securely through the Secure Mobile Access tunnel.
Edit Global Settings
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
on
389