Dell SMA 200 Administration Manual page 248

conforming to previous policies for the initial connection. Configuration is allowed globally, by group, or
per user.
• In the Allow client to use Fingerprint Authentication on Android devices, the control only blocks
future attempts to log in with fingerprint technology on Android devices when the option is disabled as
there is no method for the server to change the client settings until the client attempts a connection. So
in some cases, a client might not be conforming to previous policies for the initial connection.
Configuration is allowed globally, by group, or per user.
To have the user inherent the NetExtender settings from the global NetExtender settings, select Use Global
Settings for any of the previous options.
Configuring Group NetExtender Routes
To configure NetExtender client routes:
1 To add a NetExtender client route that is only added to this user, click the Nx Routes tab in the Edit
User Settings window.
2 To add a NetExtender client route that is only added to users in this group, click Add Client Route.
3 Type the IPv4 or IPv6 address of the trusted network to which you would like to provide access with
NetExtender in the Destination Network field.
4 For an IPv4 route, type the subnet mask in the Subnet Mask/Prefix field. For an IPv6 route, type the
prefix in the Subnet Mask/Prefix field.
5 Click Add. Repeat this procedure for all necessary routes.
6 Select Enabled from the Tunnel All Mode drop-down list to force all traffic for this user—including
traffic destined to the remote users' local network—over the Secure Mobile Access NetExtender tunnel.
7 To also add the global NetExtender client routes (which are configured on NetExtender > Client Routes
page) to users in this group, select Add Global NetExtender Client Routes.
8 Click Accept.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
248