General Server Settings - Dell SMA 200 Administration Manual

General Server Settings

When General is selected on the initial page, the Server page appears as follows. The portal and application
server settings can be set on this page.
1 In the Portal Name field, enter a unique name to identify different portals.
2 In the Portal Domain Name field, enter the domain name used to access the offloading portal.
3 In the Portal Interface field, enter the network interface to which the portal is bound. If one specific
network interface is selected, a new IP address is assigned to the portal.
4 The Portal Certificate drop-down lists all certificates that have been imported.
5 The Application Server Address field accepts settings relevant to the application server. This can simply
be the IP address of the application server. The scheme of the address is "HTTPS" by default. The port
and default path can also be set in this single field.
All these settings are verified instantly from the Appliance when the mouse leaves the input field (green check).
If the input fails, the reason it failed is shown. Only when all fields are satisfied, can you click Next to go to the
next tab.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
155