Configuring A Load Balancing Group; Load Balancing Settings - Dell SMA 200 Administration Manual

and the second SMA/SRA device are configured as the Load Balancing Members and also take up the load of the
Security Services. The Load Balancer in the previous two scenarios is essentially a dummy proxy without the
load of any Security Services to burden it.

Load Balancing Settings

The following table lists Portals > Load Balancing configuration options. Additional per-group configuration
options are described in
Table 28. Load balancing configuration options
Option
Enable Load Balancing
Enable Failover
Probe Interval

Configuring a Load Balancing Group

This section provides configuration details for creating a new load balancing group and consists of the following
sections:
• Adding a New Load Balancing Group
• Configuring Probe Settings
• Adding New Members to a Load Balancing Group
Configuring a Load Balancing Group
Description
Enables the load balancing feature across all currently active groups.
Enables/disables all probing, monitoring, and failover features.
Determines the frequency (in seconds) at which the load balancing feature checks
the status of backend nodes.
on page 196
on page 197
on page 195.
on page 197
Dell SonicWALL Secure Mobile Access 8.5
195
Administration Guide