Dell SMA 200 Administration Manual page 244

Configuring User Client IP Address Range
To configure a user client IP address range:
1 To configure an IPv4 address range for this user, enter the beginning of the range in the Client Address
Range Begin field and the end of the range in the Client Address Range End field.
2 To give this user the same IP address every time the user connects, enter the IP address in both fields.
3 To configure an IPv6 address range for this user, enter the beginning of the range in the Client IPv6
Address Range Begin field and the end of the range in the Client IPv6 Address Range End field. IPv6
configuration is optional.
To give this user the same IPv6 address every time the user connects, enter the IP address in both fields.
TIP: Unless more than one user is using the same username that is not recommended, there is no
need to configure more than one IP address for the user client IP address range.
4 Click Accept.
Configuring User DNS Settings
To configure custom NetExtender DNS settings for a user:
1 In the Primary DNS Server field, type in the IP address of the main DNS server.
2 In the Secondary DNS Server field, optionally type the IP address of the backup DNS server.
3 In the DNS Domain field, type the domain for the DNS servers.
4 Click Accept.
Configuring User NetExtender Settings
The following NetExtender settings can be configured for the user:
• Exit Client After Disconnect - The NetExtender client exits when it becomes disconnected from the
SMA/SRA server. To reconnect, users should either return to the Secure Mobile Access portal and click
NetExtender or launch NetExtender from their Programs menu.
• Uninstall Client After Exit - The NetExtender client automatically uninstalls when it terminates or
when the user selects Exit (as opposed to simply disconnecting). To reconnect, users should return to the
Secure Mobile Access portal and click NetExtender. This option only applies to Windows clients. It does
not apply to Android, Mac, or Linux clients.
• Create Client Connection Profile - The NetExtender client creates a connection profile recording the
SMA/SRA server name, the domain name and optionally the username and password.
• The User Name & Password Caching options provide flexibility in allowing users to cache their
usernames and passwords in the NetExtender client. The three options are Allow saving of user name
only, Allow saving of user name & password, and Prohibit saving of user name & password. These
options enable administrators to balance security needs against ease of use for users.
• In the Allow client to use Touch ID on IOS devices, the control only blocks future attempts to log in with
fingerprint technology on IOS devices when the option is disabled as there is no method for the server to
change the client settings until the client attempts a connection. So in some cases, a client might not be
conforming to previous policies for the initial connection. Configuration is allowed globally, by group, or
per user.
• In the Allow client to use Fingerprint Authentication on Android devices, the control only blocks
future attempts to log in with fingerprint technology on Android devices when the option is disabled as
there is no method for the server to change the client settings until the client attempts a connection. So
in some cases, a client might not be conforming to previous policies for the initial connection.
Configuration is allowed globally, by group, or per user.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
244