Portals > Url Based Aliasing; Url Based Aliasing Overview; Adding A Url Based Aliasing Group - Dell SMA 200 Administration Manual

4 Select a Scheme to connect to the backend server. Select one of the following options from the drop-
down list: HTTP, HTTPS, or AUTO. The default value is HTTPS.
If AUTO is selected, specify two port numbers for HTTPS and HTTP.
NOTE: To enable HTTP access for the App Offloading Portal, select Enable HTTP access, located
on the Virtual Host tab of the portal.
5 Enter the back end HTTP(S) server IP address in the IPv4/IPv6 Address field.
6 Enter the Port for the backend server. The default value for an HTTPS connection is 443. For Auto
schemes, enter the port numbers for HTTPS and HTTP.
7 Click Accept to add this member to the group.
Portals > URL Based Aliasing
This section provides an overview of the Portals > URL Based Aliasing page and a description of the
configuration tasks available on this page.
• URL Based Aliasing overview
• Adding a URL Based Aliasing group
• Default Site Settings
• URL Based Aliasing Group with Application Offloading

URL Based Aliasing overview

URL Based Aliasing provides the ability to access several different Web sites through one portal using one
domain name. This feature is designed to be consistent with the Load Balancing setting. Because URL Based
Aliasing involves rewriting URLS found in the content served by the backend Web server, the backend Web
application should be compatible with third-party proxies. If a Web application does not render properly using
URL Based Aliasing, you might need to set up access to the application using App Offloading without URL
rewriting or using NetExtender.

Adding a URL Based Aliasing group

See also:
• Adding members
• Deleting a group
• Deleting a member
on page 198
on page
on page 201
on page 200
on page 200
on page 201
198
on page 202
Dell SonicWALL Secure Mobile Access 8.5
198
Administration Guide