Configuring Internal Captive Portal Authentication When Editing A Guest Network; Configuring Internal Captive Portal With External Radius Server Authentication When Adding A Guest Network; Figure 67 Configuring Captive Portal When Editing A Guest Network - Dell PowerConnect W-IAP175P User Manual

4. Select InternalServer from the Authentication server 1 drop-down list to authenticate user credentials at run
time.
5. Click Next and click Finish.

Configuring Internal Captive Portal Authentication when Editing a Guest Network

To configure internal captive portal authentication when editing a guest network, perform the following steps:
1. In the Network tab, click the network for which you want to configure internal captive portal authentication.
The edit link for the network appears.
2. Click the edit link. The Edit box for the network appears.
3. Click Next and select one of the following options for the splash page type in the Security tab:
a. Internal—Authenticated
a. Internal—Acknowledged
Figure 67
The appearance of a splash page can be customized as required. For information on customizing a splash page,
see "Customizing a Splash Page" on
4. Click Next and click Finish.
Configuring Internal Captive Portal with External Radius Server Authentication when Adding a Guest
Network
To configure internal captive portal with external radius server authentication, perform the following steps:
1. In the Network tab, click the New link. The New Network box opens.
2. In the Basic Info tab, perform the following:
1. Enter a name for the network in the Name (SSID) text box.
2. Select Guest and then click Next.
3. In the Security tab, select Internal—Authenticated under the splash page type.
86 | Authentication
Configuring Captive Portal when Editing a Guest Network
page 87.
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide