Dell SMA 200 Administration Manual page 368

• Manual: Provides options to configure the modes, their priorities, and the choose method. At
least one mode should be enabled in the selection box.
The launch sequence is as follows: HTML5, and Java. Selecting Manual allows you to change,
enable, or disable the launch methods. If you select Native to launch the Telnet bookmark, then
the SMA Connect Agent launches the Telnet Receiver on the local machine to do the Telnet
connection.
The up and down arrows are used to adjust the launch priority. Fork and tick are used to disable
or enable the modes. Disabled modes are put at the bottom of the list with a gray font color.
The Choose during Launch option is not enabled by default under the Manual mode. In this
setting, while launching the bookmark, the first available mode in the configured list is run at
once after auto-detection.
After the Choose during Launch option is enabled, while launching the unified bookmark, if
there are multiple modes available for the client, a menu is provided from which you can choose
within a five second count-down. When only one mode is available, the bookmark is also run
immediately.
If the Remember my choice option is selected during the launch time, the selected mode is
remembered through a cookie.
That means, when next launching the bookmark, the remembered mode is run directly within two
seconds. Clicking anywhere in the HTML can 'forget' the remembered mode so you can re-choose.
Editing or deleting the bookmark in the same browser can also reset the remembered mode.
When no modes are able to run on the client with the configuration, the following notice appears.
Dell SonicWALL Secure Mobile Access 8.5
368
Administration Guide