Load Balancing Server Settings; Url-Based Aliasing Server Settings - Dell SMA 200 Administration Manual

Load Balancing Server Settings

When Load Balancing is selected on the initial page, the Server page appears as follows.
1 In the Portal Name field, enter a unique name to identify different portals.
2 In the Portal Domain Name field, enter the domain name used to access the offloading portal.
3 In the Portal Interface field, enter the network interface to which the portal is bound. If one specific
network interface is selected, a new IP address is assigned to the portal.
4 The Portal Certificate drop-down lists all certificates that have been imported.
5 The Load Balancing Group field replaces the Application Server Address field to show the existing Load
Balancing Group to which you can assign to this portal. If no Load Balancing Group exists, you can create
a new one by clicking "click here to create."
All these settings are verified instantly from the Appliance when the mouse leaves the input field (green check).
If the input fails, the reason it failed is shown. Only when all fields are satisfied, can you click Next to go to the
next tab.

URL-based Aliasing Server Settings

Select URL Based Aliasing on the initial page when you want the ability to access several Web sites using one
portal and domain name. When this option is enabled, the screen options change. You will need to select the
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
156