Dell SMA 200 Administration Manual page 178

2 If adding the domain, select LDAP from the Authentication Type menu. The LDAP domain configuration
fields are displayed.
3 If adding the domain, enter a descriptive name for the authentication domain in the Domain Name
field. This is the domain name users select in order to log in to the SMA/SRA appliance user portal. It can
be the same value as the Primary LDAP Server Address field.
4 Enter the search base for LDAP queries in the LDAP baseDN field. An example of a search base string is
CN=Users,DC=yourdomain,DC=com.
TIP: It is possible for multiple OUs to be configured for a single domain by entering each OU on a
separate line in the LDAP baseDN field. In addition, any sub-OUs are automatically included when
parents are added to this field.
NOTE: Do not include quotes ("") in the LDAP BaseDN field.
5 Enter the IP address or domain name of the Primary LDAP server in the Server Address field.
6 Enter the common name and password of a user that has been delegated control of the primary server in
the Login Username and Login Password fields.
NOTE: When entering Login Username and Login Password, remember that the SMA/SRA
appliance binds to the LDAP tree with these credentials and users can log in with their
sAMAccountName.
7 Optionally enter the IP address or domain name of a backup LDAP server in the Server Address field,
under the Backup LDAP server section.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
178