Dell SMA 200 Administration Manual page 254

2 When the Edit Local User page appears, click the EPC tab. Use the EPC tab to enable or disable EPC for
the user, select how to handle authentication requests from unsupported clients, and to add or remove
device profiles.
3 In the Enable EPC field, select Enabled to enable EPC for the user, Disabled to disable EPC for the user,
or Use group setting to either enable or disable EPC based on whether EPC is enabled on the End Point
Control > Settings page.
4 In the Enable Portal Login field, set the default action to Enabled to allow or Disabled to block logins
when EPC is enabled.
5 EPC is supported for iOS and Android mobile clients. In the Enable Mobile Client Login field, set the
default action to Enabled to allow logins or Disabled to block logins from these clients when EPC is
enabled. Or set the default action to Use group setting to either enable or disable EPC based on
whether EPC is enabled on the End Point Control > Settings page
6 In the Recurring EPC section, configure when EPC checks should be conducted. Select Check endpoint
at login to do EPC checks only when users login, or select Check endpoint at login and every x
minutes thereafter to also do EPC checks at set intervals. For example, to do EPC checks whenever a
user logs in and every x minutes thereafter while the user is logged in, select Check endpoint at login
and every x minutes thereafter and type the number of minutes to wait between EPC checks.
7 Fields in the Recurring EPC section vary, depending on whether you are configuring EPC for the Global
group or a local user. To configure EPC for the Global group, select Check endpoint at login to do EPC
checks only when users login, or select Check endpoint at login and every x minutes thereafter to
also do EPC checks at set intervals. For example, to do EPC checks whenever a user logs in and every x
minutes thereafter while the user is logged in, select Check endpoint at login and every x minutes
thereafter and type the number of minutes to wait between EPC checks.
OR
To configure EPC for a local user, select Use global setting or Custom Setting from the Recurring EPC
drop-down list. If you select Use global setting, the local user inherits the EPC settings from the Global
group. If you select Custom Setting, the Check endpoint at login and Check endpoint at login and
every x minutes thereafter prompts are displayed and you can configure EPC, as explained for the
Global group.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
254