Dell SMA 200 Administration Manual page 287

You can also revert back to using the global settings for the signature group to which this signature belongs
without losing the configuration details of existing exclusions.
The list of signatures can be sorted by the contents of any column in ascending or descending order by clicking
the column heading. In addition, signatures can be divided into pages and filtered by searching for a key word.
To display only signatures containing a key word in all fields or a specific field, type the key word in the Search
field, select All Fields or a specific field to search, and click Search. Or, click Exclude to display only
signatures that do not contain the key word. Click Reset to display all signatures. All matches are highlighted.
The default is 50 signatures per page.
On the Web Application Firewall > Settings page, global settings must be set to either Prevent All or Detect All
for the Signature Group to which the specific signature belongs. If neither is set, that Signature Group is
globally disabled and cannot be modified on a per-signature basis. See
Configuring General Settings
See the following sections:
• Enabling Performance Optimization
• Configuring Signature Based Custom Handling and Exclusions
• Reverting a Signature to Global Settings
• Removing a Host from a Per-Signature Exclusion
on page 279.
on page 288
on page
Enabling Web Application Firewall and
on page 288
289
on page 290
Dell SonicWALL Secure Mobile Access 8.5
287
Administration Guide