Table of Contents
Advertisement
5
For an IPv4 destination network, type the subnet mask in the Subnet Mask/Prefix field using decimal
format (255.0.0.0, 255.255.0.0, or 255.255.255.0). For an IPv6 destination network, type the prefix,
such as 112.
6
Click Add.
7
Repeat this procedure for all necessary routes.
NetExtender > Advanced Settings
The NetExtender > Advanced Settings page allows you to set traffic log settings and upload post connection
script files.
Topics:
•
NetExtender Traffic Log
•
Post Connection Scripts
NetExtender Traffic Log
Traffic logging allows you log traffic information over the NetExtender tunnel by enabling the Allow logging Nx
Traffic. You can configure how many days to keep the log data, where expired data is automatically removed.
Leave the value as 0 to keep log data forever. View the log data in the NetExtender > Log page.
Post Connection Scripts
Administrators are now able to upload or delete post connection script files for NetExtender. Navigate to the
NetExtender > Advanced Settings page and scroll down to the Post Connection Script Files section.
Click Choose File to upload a file from your local system. Then, click Upload. After uploaded, the file displays
in a list.
To delete a script file, locate the file you want to delete, and click the 'X' delete icon.
on page
240
on page
240
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
240
Advertisement
Chapters
Table of Contents
Troubleshooting
