•
Select Display Bookmark to Mobile Connect clients to display the bookmark on mobile devices.
(Option available for all Terminal Services.)
NOTE:
Virtual Network Computing (VNC)
•
In the Encoding drop-down list, select one of the following:
•
Raw – Pixel data is sent in left-to-right scanline order, and only rectangles with changes
are sent after the original full screen has been transmitted.
•
RRE – Rise-and-Run-length-Encoding uses a sequence of identical pixels that are
compressed to a single value and repeat count. This is an efficient encoding for large
blocks of constant color.
•
CoRRE – A variation of RRE, using a maximum of 255x255 pixel rectangles, allowing for
single-byte values to be used. More efficient than RRE except where very large regions are
the same color.
•
Hextile – Rectangles are split up in to 16x16 tiles of raw or RRE data and sent in a
predetermined order. Best used in high-speed network environments such as within the
LAN.
•
Zlib – Simple encoding using the zlib library to compress raw pixel data, costing a lot of
CPU time. Supported for compatibility with VNC servers that might not understand Tight
encoding which is more efficient than Zlib in nearly all real-life situations.
•
Tight – The default and the best encoding to use with VNC over the Internet or other low-
bandwidth network environments. Uses zlib library to compress pre-processed pixel data
to maximize compression ratios and minimize CPU usage.
•
In the Compression Level drop-down list, select the level of compression as Default or from 1
to 9 where 1 is the lowest compression and 9 is highly compressed.
•
The JPEG Image Quality option is not editable and is set at 6.
•
In the Cursor Shape Updates drop-down list, select Enable, Ignore, or Disable. The default is
Ignore.
•
Select Use CopyRect to gain efficiency when moving items on the screen.
•
Select Restricted Colors (256 Colors) for more efficiency with slightly less depth of color.
•
Select Reverse Mouse Buttons 2 and 3, to switch the right-click and left-click buttons.
•
Select View Only if the user is not making any changes on the remote system.
•
Select Share Desktop to allow multiple users to view and use the same VNC desktop.
•
Select Display Bookmark to Mobile Connect clients to display the bookmark on mobile devices.
Citrix Portal (Citrix)
•
In the Resource Window Size drop-down list, select the default Citrix portal screen size to be
used when users execute this bookmark.
9
Select an Access Type Selection. Smart or Manual.
•
Smart: Allows the firmware to decide which mode to launch on the client.
When creating a new unified bookmark, Smart is selected by default. Auto-detection is processed
using bookmark-specific default modes while launching the bookmark.
RDP over HTML5 is supported using the default/standard browser in iOS or Android.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
398