Emailing Logs; Log > Settings - Dell SMA 200 Administration Manual

Each log entry displays the following information:
Table 46. Log View Columns
Column
Time
Priority
Category
Source
Destination
User
Message

Emailing Logs

The E-mail Log button allows the administrator to immediately send and receive a copy of the Secure Mobile
Access event log. This feature is useful archiving email and in testing email configuration and email filters for
multiple SMA/SRA appliances.
To use the E-mail Log feature:
1 Navigate to Log > View.
2 Click E-mail Log.
3 The message Log has been successfully sent appears.
NOTE: If you receive an error message, verify that the administrator email and mail server
information has been specified in the Email Logging and Alerts section of the Log >
Settings page. For instructions on configuring the administrator email, refer to
Log Settings
Log > Settings
This section provides an overview of the Log > Settings page and a description of the configuration tasks
available on this page.
• Log > Settings Overview
• Configuring Log Settings
• Configuring the Mail Server
Description
Displays the date and time of log events in the format YY/MM/DD/HH/MM/SS
(Year/Month/Day/Hour/Minute/Second). Hours are displayed in 24-hour clock
format. The date and time are based on the local time of the SMA/SRA
gateway which is configured in the System > Time page.
Displays the level of severity associated with the event. Severity levels can be
Emergency, Alert, Critical, Error, Warning, Notice, Information, and
Debug.
The category of the event message.
Displays the IP address of the appliance of the user or administrator that
generated the log event. The source IP address cannot be displayed for
certain events, such as system errors.
Displays the name or IP address of the server or service associated with the
event. For example, if a user accessed an Internet Web site through the
Secure Mobile Access portal, the corresponding log entry would display the IP
address or Fully Qualified Domain Name (FQDN) of the Web site accessed.
The name of the user who was logged into the appliance when the message
was generated.
The text of the log message.
.
on page 422
on page 422
on page 422
on page 424
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
Configuring
421