Figure 21: Time and date settings window
Table 6: Description of the Time and Date settings window
Option
1. Time Zone
2. System Date and Time
3. Auto DST Adjustment
4. Enable DST
From
To
5. DST Bias
General recorder settings
Use the Device Management menu to configure the recorder name, manage an external
eSATA device, and to start the wizard at login.
TruVision NVR 70 User Manual
Description
Select a time zone from the list.
Enter the system date and time. Default is the current date and time. Time is always
in 24-hour format.
Enable to activate DST is automatically. It depends on the time zone selected.
Default is Disable.
Manually define DST. If this option is selected, the Auto DST adjustment option is
disabled. Default is Disable.
Click the check box to enable or disable daylight savings time (DST).
Enter the start date and time for daylight savings.
Enter the end date and time for daylight savings.
Set the amount of time to move DST forward from the standard time. Default is 60
minutes.
13BChapter 14: Device management
85