Table of Contents
Advertisement
9BChapter 10: Camera setup
To set up video tampering detection:
1. From the menu toolbar, click
Camera
Tamper.
2. Select a camera to configure for video loss detection.
3. Check the
Enable Camera Tamper
4. Select the area on-screen to be sensitive to tamper. By default none of the screen is
sensitive to tamper. Only one area can be drawn.
Click the
Start Draw
areas sensitive to motion detection. Click the
to clear the screen.
5. Select the tamper detection sensitivity level by clicking the sensitivity scroll bar. Higher
sensitivity is to the right of the bar.
6. Select the arming schedules for tamper.
Click the
Arming Schedule
and the time periods during the day when motion can be recorded. You can schedule up to
eight time periods in a day. Default is 24 hours.
Note: Time periods defined cannot overlap.
7. Specify the linkage method when an event occurs.
Click the
Actions
recorder to notify you of the alarm (see page 81 for the list of alarm notification types
available). "Notify Alarm Host" is the default selection. More than one option can be
selected.
8. In the Actions window, specify which external alarm outputs are triggered when an event
occurs.
9. Click
Save
to save settings.
Text overlay
You can add up to four lines of text on screen via the browser. This option can be used, for
example, to display emergency contact details. By default these lines of text are positioned
along the top of the screen. The strings follow each other consecutively.
To add on-screen overlay text:
1. From the menu toolbar, click
Text
Overlay.
2. Select the desired camera.
3. Check the string box
4. Enter the text for string 1 in the column alongside. Up to 44 alphanumeric characters can be
used.
58
Configuration
box to enable the feature.
button and drag the mouse cursor across the window to deselect
tab and then click the
tab to open the Actions window. Select the method by which you want the
Configuration
1
for the first line of text.
>
Remote Configuration
Stop Draw
button to select areas. Click
Edit
button. Select the day of the week
>
Remote Configuration
>
Camera Setup
>
Clear
>
Camera Setup
>
TruVision NVR 70 User Manual
Advertisement
Table of Contents
