Preset Tours - Interlogix TruVision 70 User Manual

Figure 5: PTZ controls panel
Presets
Presets are previously defined locations of a PTZ dome camera. It allows you to quickly move
the PTZ dome camera to a desired position. They are controlled from the PTZ panel in live
view. You can set up to 255 presets for a camera.
Presets are saved on the camera and not on the recorder. The presets are identified on screen
when they occur.
To call up a preset:
1. In live view, click the PTZ/Video parameters button to open the PTZ controls panel. Select
the desired camera from the camera list.
2. Click the Preset button at the bottom of the PTZ panel to list all the presets.
3. Click the desired preset from the Preset list in the PTZ panel and click the
up the preset. The camera immediately jumps to the preset position.

Preset tours

Preset tours are series of presets. You can set up to eight preset tours for a camera.
Preset tours are saved on the camera and not on the recorder.
TruVision NVR 70 User Manual
1. Directional pan/auto-scan buttons: Controls the
movements and directions of the PTZ. Center button is
used to start auto-pan by the PTZ dome camera.
2. Adjust speed of PTZ dome camera.
3. Adjust zoom, focus, and iris.
4. Turn on or off the camera light (Not used).
5. Lens initialization: Initialize the lens of a camera with a
motorized lens, such as PTZ or IP cameras. This function
helps to maintain lens focus accuracy over prolong periods
of time.
6. Start or stop camera wiper (Not used).
7. Auxiliary focus: Automatically focus the camera lens for the
sharpest picture.
8. Start selected preset/tour/shadow tour (depending on
function selected).
9. List presets available.
10. List preset tours available.
11. List shadow tours available.
12. Modify brightness, contrast, saturation, and hue values.
4BChapter 5: Live view
button to call
23