Table of Contents
Advertisement
Figure 7: Shadow tour interface
To call up a shadow tour:
1. In live view, click the PTZ/Video parameters button to open the PTZ controls panel. Select
the desired camera from the camera list.
2. Click the Shadow Tour button
3. Select the desired shadow tour and click the run button. The camera immediately carries
out the shadow tour movement. Click the stop button to stop the tour.
To set up a shadow tour:
1. In live view, click the PTZ/Video parameters button to open the PTZ controls panel. Select
the desired camera from the camera list.
2. Click the Shadow Tour button
3. Click the record button and, using the PTZ directional buttons, move the camera to follow
the desired path. Click the save button to save the tour.
Note: A shadow tour can be overwritten.
TruVision NVR 70 User Manual
Save shadow tour
Record shadow tour
at the bottom of the PTZ panel to list all the shadow tours.
at the bottom of the PTZ panel to list all the shadow tours.
Stop shadow tour
Run shadow tour
4BChapter 5: Live view
25
Advertisement
Table of Contents
