Table of Contents
Advertisement
3BChapter 4: Operating instructions
Figure 2:
TVN 70
front panel
The controls on the front panel include:
Table 2: Front Panel Elements
Name
1.
Front panel lock
2.
Status LEDs
3.
Archive button
4.
USB 3.0 port
Access the web browser
To access the recorder, open the web browser and enter the IP address or domain name
assigned to the recorder. On the logon window, enter the default user ID and password.
16
Description
You can lock or unlock the front panel with a key. It provides access to the
HDDs.
Alarm: A blinking RED light indicates that there is a sensor Alarm In. No light
indicates no alarm.
Internal: No light indicates that the recorder is currently recording video/audio. A
blinking RED light indicates internal health failure.
Network: A steady GREEN light indicates that the recorder is currently
connected to a network. A blinking RED light indicates that the recorder is not
connected to any network.
HDD: A steady GREEN light indicates that the recorder is accessing the HDD in
a read or write operation. A blinking RED light indicates HDD failure. No light
indicates that the unit is in idle state.
Archive: A steady GREEN light indicates that archiving is in progress. No light
indicates no archiving in progress.
Press once to enter quick archive mode. Press twice to start archiving. If the
USB stick has an LED, it will flash during archiving.
There is one USB port. Use the USB port to archive video or connect a USB
CD/DVD burner.
TruVision NVR 70 User Manual
Advertisement
Table of Contents
