Table of Contents
Advertisement
14BChapter 15: Storage management
2. Click the
Enable RAID
The system will automatically reboot.
Caution: The system can take up to 10 minutes to fully restart. Do not manually disconnect
power during restart.
3. Once the system has restarted, go to the
4. Click the
Create
button to open the "Create Array" window.
5. Enter a name for the array, and select the RAID level and the drives to be included.
6. Click
OK
to start the process. When the process is complete, data on the RAID group is
displayed.
Note:
You can create a RAID array of RAID 0, RAID 1, RAID 5, and RAID 10.
•
If you choose RAID 0, at least 2 HDDs must be installed.
•
If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
•
If you choose RAID 5, at least 3 HDDs must be installed.
•
If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.
To rebuild a RAID array:
1. From the menu toolbar, click
Management
>
Raid
2. Ensure the
Enable RAID
3. Click the
Rebuild
4. Select the HDD to include.
5. Click
OK
to start the process. When the process is complete, data on the RAID group is
displayed.
98
checkbox.
Configuration
Settings.
checkbox is checked.
button to open the "Rebuild Array" window.
Raid Settings
menu.
>
Remote Configuration
>
Storage
TruVision NVR 70 User Manual
Advertisement
Table of Contents
