Interlogix TruVision 70 User Manual page 97

3. Select a camera whose storage capacity you want to change and enter the values in GB for
the maximum record capacity and snapshot capacities. The available quota space available
is displayed on screen.
4. If you want to copy these values to other cameras, select each camera individually.
5. Click Save to save the settings.
Group HDDs
Your recorder can organize multiple HDDs into groups. Videos from specified channels can be
set to be recorded onto a particular HDD group. You could, for example, save the records from
a couple of high priority cameras to one HDD, and save the recordings from all the other
cameras to another HDD.
To set up an HDD group:
1. From the menu toolbar, click
Management > Storage
2. Under Mode, select Group.
3. Under Record on HDD
4. Check the channels to be added to this group.
Note: By default, all channels belong to HDD group 1.
5. Click Save to save the settings.
Dual streaming capacity
You can set up the recorder so that it records both main stream and substream. Doing so will
allow you to, via the browser or TruVision Navigator, get access to the substream in both live &
playback. You are also able to set the dual stream ratio. This can be useful, for example, if you
have bandwidth limitations as you can then adjust the ratio to record more substream than main
stream.
To set up dual streaming mode:
1. From the menu toolbar, click
Management > Storage
2. Under the Mode
3. Under Capacity Ratio, use the mouse to adjust the main stream/substream storage ratio.
By default, the ratio is 50:50.
TruVision NVR 70 User Manual
Configuration
Mode.
Group, select a number for the HDD group.
Configuration
Mode.
option, select Dual Streaming.
14BChapter 15: Storage management
> Remote Configuration
> Remote Configuration
> Storage
> Storage
95