Table of Contents
Advertisement
To search for available cameras, click Search/Add. All the cameras found will be listed on
screen. Select the desired cameras and click
If you already know the specific camera to add, enter its IP address, protocol, user name,
transfer protocol, registration mode, management port and password, and click OK.
Click
Next
to move to the next page or click
8. Recording configuration:
Configure your recording settings as required. The settings apply to all cameras connected
to the recorder.
Check the desired time lapse check
To record motion detection events, check
To record alarm events, check
Click
Next
to move to the next page, or
Note: You can configure the recording parameters of each individual camera for the
different recording schedules in the recording menu.
TruVision NVR 70 User Manual
OK
to add to your list.
Back
to return to the previous page.
box, TL-Hi
or TL-Lo.
Enable Motion Detection
Enable Alarm Input
Back
to return to the previous page.
2BChapter 3: Getting started
Plan.
Plan.
13
Advertisement
Table of Contents
