Table of Contents
Advertisement
4BChapter 5: Live view
Figure 6: Preset tour interface
Delete preset
To call up a preset tour:
1. In live view, click the PTZ/Video parameters button to open the PTZ controls panel. Select
the desired camera from the camera list.
2. Click the Preset Tour button
3. Click the desired preset tour from the Preset tour list in the PTZ panel and click the start
button to start the tour. The camera immediately moves through the preset tour.
To add a preset tour:
1. In live view, click the PTZ/Video parameters button to open the PTZ controls panel. Select
the desired camera from the camera list.
2. Click the Preset Tour button
3. Click
to add a preset. The Step window appears. Select the preset number and enter the
dwell time and speed of the step.
Note: A preset tour should have at least two presets.
4. Click
OK
to save the settings. The tour appears in the list.
5. Repeat steps 3 and 4 to add other presets to the preset tour.
Shadow tours
Shadow tours allow you to record the manual movement of a PTZ and follow the same tour at a
later date. You can set up to eight shadow tours for a camera.
Shadow tours are saved on the camera and not on the recorder.
24
Run preset tour
Stop preset tour
Add preset tour
at the bottom of the PTZ panel to list all the preset tours.
at the bottom of the PTZ panel.
Save preset tour
Edit preset step
TruVision NVR 70 User Manual
Advertisement
Table of Contents
