General Recorder Settings - Interlogix TruVision 21 User Manual

Chapter 14: Device management

General recorder settings

Use the General Settings menu of Device Management to configure general recorder
options.
See Figure 31 and Table 14 on page 98 for the general options available. The changes
are immediately implemented once Apply is clicked to save the settings.
Figure 31: General settings of the recorder
Table 15: Description of the Monitor setup window: General settings
Option
1. Language
2. Device Name
3. Remote Control ID
4. Keypad Zone ID
5. Menu Timeout
98
Description
Define the language of the system.
Select the desired language from the drop-down list and click Apply. The
language displayed changes immediately.
Default is English.
Define the recorder name. The default name is NVR 21S.
Click the edit box and enter the new name from the soft keyboard.
The device number to use for the recorder when linking the device to a
remote control. The default value is 255.
The Keypad Zone ID number.
Define the time in minutes after which the menu window reverts to live
view mode. Select a time from the drop-down list, and click Apply. Menu
timeout also applies to the system idle time after which a password will be
required.
Default value is 5 minutes.
TruVision NVR 21 (SP) User Manual