Configuration Files - Interlogix TruVision 70 User Manual

Configuration files

You can export and import configuration settings from the recorder. This is useful if you want to
copy the configuration settings to another recorder, or if you want to make a backup of the
settings.
This menu also allows you to reboot the unit, and restore default factory settings
Restart the recorder
To restart the recorder:
1. From the menu toolbar, click
Management > Configuration
2. Click the Restart
Note: Only the administrator can reboot the unit.
3. In the pop-up window, enter your admin password and click OK.
The system reboots.
Restore default settings
The administrator can reset the recorder to the factory default settings. Network information
such as IP address, subnet mask, gateway, MTU, NIC working mode, server port, and default
route are not restored to factory default settings
Note: Only the administrator can restore factory default settings.
To restore parameters to default factory settings:
1. From the menu toolbar, click
Management > Configuration
2. To restore all parameters to default factory settings:
Click the Default
that you want to restore all parameters to default.
 Or 
To restore all parameters, except network settings, to default factory settings:
Click the Restore
confirm that you want to restore all parameters except network settings to default.
3. The changes are immediately implemented.
Import and export files
Insert an external storage device in the recorder. Go to the
Configuration > Device Management
settings.
TruVision NVR 70 User Manual
Configuration
Files.
button.
Configuration
Files.
button. Enter the Admin password, click OK, and then click
button. Enter the Admin password, click OK, and then click
>
> Remote Configuration
> Remote Configuration
Configuration
Configuration Files
13BChapter 14: Device management
> Device
> Device
Yes
Yes
> Remote
to import or export configuration
to confirm
to
87