Storage Management - Interlogix TruVision 70 User Manual

Chapter 15

Storage management

This chapter describes the content of the Storage Management menu, including HDD
information, Storage Mode, S.M.A.R.T. settings as well as RAID settings.
HDD information
You can check the status of any of the installed HDDs on the recorder at any time.
To check the status of a HDD:
1. From the menu toolbar, click
Management > HDD
2. Note the status of the HDDs listed under the Status column.
If the status is listed as Normal or Sleeping, the HDD is in working order. If it is listed as
Abnormal and has already been initialized, the HDD needs to be replaced. If the HDD is
Uninitialized, you need to initialize it before it can be used in the recorder. Refer to
"Initializing HDDs" above for more information.
Note: The status information is also shown in the
TruVision NVR 70 User Manual
Configuration
Information.
> Remote Configuration
System Information > HDD
> Storage
window.
91