Table of Contents
Advertisement
2BChapter 3: Getting started
5. Time and date configuration:
Select the desired system time and time zone.
If Daylight saving time (DST) is required, check
and winter times.
Note: The system time and date are visible on screen. However, the time and date shown
on-screen are set in the camera settings.
Click
OK
and then
page.
6. HDD initialization:
The hard drives are initialized at the factory. However if you wish to clear all data, click
Initialize
to initialize the selected HDD and
return to the previous page.
7. Search and add IP cameras:
You can search the network for available IP cameras and add them to the recorder.
12
Next
to move to the next page or click
Enable DST
and enter the desired summer
Back
to return to the previous
Next
to move to the next page, or
Back
to
TruVision NVR 70 User Manual
Advertisement
Table of Contents
