Table of Contents
Advertisement
Access the web browser
To access the recorder, open the Microsoft Internet Explorer web browser and enter the IP
address assigned to the recorder, as a web address. On the logon window, enter the default
user ID and password.
Note: Only one recorder can be viewed per browser.
User ID: admin
Password: 1234
The default values for recorder network settings are:
•
IP address - 192.168.1.82
•
Subnet mask - 255.255.255.0
•
Gateway address - 192.168.1.1
•
Server port: 8000
•
Ports:
When using the browser:
RTSP port: 554
HTTP port: 80
For more information on port forwarding, see Appendix B "Port forwarding information" on page
110.
Select a camera and a day to search from on the calendar displayed, and then click Search.
The timeline below the page indicates video recorded for the specified day. The timeline also
classifies by color the type of recording with each type.
Click and drag the marker across the timeline on where you want video playback to begin, and
then click Play on the playback control toolbar. You can capture a snapshot of a video image,
save the video playback, or download the recorded video.
Configure the recorder via the browser
Click
Configuration
ways to configure the recorder: Browser and Remote.
Browser configuration
Browser configuration lets you define communication and network parameters such as protocol
type, maximum file size, stream type and network transmission settings. You can also specify
the directory locations for saving recorded and playback video, captured images, and
downloaded files.
The browser interface settings are saved on your PC, not on the recorder.
TruVision NVR 70 User Manual
on the menu toolbar to display the configuration window. There are two
8BChapter 9: Web browser configuration
When using TruNav:
RTSP port: 554
Server/Client software port: 8000
47
Advertisement
Table of Contents
