Table of Contents
Advertisement
9BChapter 10: Camera setup
•
Max. Bitrate (kbps): If the customized maximum bit rate mode was selected, enter the
value here. The recommended bit rate range to use is displayed.
5. Click
Apply
to save the settings.
6. If you want to save these parameters to another camera, select the desired cameras under
"Copy to Camera".
Note: When copying settings to cameras that do not support the settings, an error message
will be displayed when trying to save. For example, it is not possible to set a Full HD
resolution on a camera that does not support that resolution.
7. Click
Save
to save the settings.
Camera OSD
The recorder lets you configure which information is displayed on-screen for each individual
camera.
The on-screen display (OSD) settings appear in live view mode and include the camera name,
time and date. They are part of the image and are therefore also recorded.
To configure the OSD settings:
1. From the menu toolbar, click
2. Select the desired camera and enter a name for the camera, if required. The name can
have up to 32 alphanumeric characters.
3. Check the
Display
name, date, and week.
4. Select a date format and a time format.
5. Select how you want the camera information displayed.
Select one of the options from the drop-down list. Default is non-transparent & not flashing.
•
Transparent & Flashing
•
Transparent & Not flashing
54
Configuration
Name,
Display
Date, and
>
Camera Setup
>
Camera
Display Day
boxes to display the camera
OSD.
TruVision NVR 70 User Manual
Advertisement
Table of Contents
