Table of Contents
Advertisement
12BChapter 13: Alarm and event setup
The timeout setting lets you define how long an alarm signal remains active after the alarm
has ended. If you select
acknowledged (see "Manual trigger" below).
4. Select the arming schedule for the alarm output.
Under the
Arming Schedule
window. Select the day of the week and the time periods during the day when motion can
be recorded. You can schedule up to eight time periods in a day. Default is 24 hours.
Note: The time periods defined cannot overlap.
Click
Copy
to copy the settings to other days of the week and holiday period.
Click
OK
to save the settings.
5. Click
Copy
to copy these settings to other alarm outputs, if required,
6. Click
Apply
to save the changes.
Manual trigger
The manual trigger menu allows you to manually trigger outputs of the recorder. Clicking a
trigger once enables the alarm, clicking a second time disables the alarm.
To trigger or clear alarm outputs manually:
1. From the menu toolbar, click
Setup
>
Manual
2. Select the desired alarm output and click the following buttons:
Trigger / Clear: Trigger an alarm output or stop an alarm output. As there is only one alarm
output available, the "Trigger All" button just triggers the one output.
Clear All: Stop all alarm outputs at once.
Note: The alarm output name can be entered in the Alarm Output menu.
Buzzer settings
When an alarm is triggered by the system or a camera, the recorder can be set up to respond
with a warning buzzer. The buzzer time is the time that it takes for the recorder to time-out the
buzzer when a continuous alarm occurs. For example, when a physical alarm input is
continuously triggered, the buzzer will time out after the time specified.
Select
Alarm & Event Setup > Buzzer Settings
and camera alarms. Select Mute, 5 s, 10 s, 20 s, 30 s, 60 s, 120 s, 240 s, or Constant. Default
is mute.
80
Manually
Clear, the alarm signal remains active until it is
tab click the
Configuration
Trigger.
Edit
button to open the Arming Schedule
>
Remote Configuration
and select a buzzer time limit for the system
>
Alarm & Event
TruVision NVR 70 User Manual
Advertisement
Table of Contents
